色窝窝免费播放视频在线,最近的中文字幕视频完整,久久天天躁狠狠躁夜夜婷,天天AV天天爽无码中文

1. The system is designed with low failure rate and low maintenance.

2. The intake of softening water equipment should be opened for a long time, unless the medical pure water equipment is under the condition of equipment maintenance.

3. If no water is needed, the outlet valve can be closed. If the effluent is not qualified due to incomplete equipment regeneration, it can be regenerated manually.

4. When the softening water equipment is out of service for a long time, the water-using equipment in chemical industry should be protected by brine inhalation tank.

5. The working procedure is to prepare 1/2 more concentrated brine than usual, manually regenerate the equipment, and immediately close the water outlet after the equipment sucks the brine clean by its own food and water equipment, while cutting off the power supply and closing the water outlet valve.

6. When put into use again, only need to prepare brine as normal. First open the intake valve, then connect the power supply, let the equipment reset by itself, and then manually regenerate once to open the outlet valve. In this way, the softening water equipment can produce qualified softening water.

7. If the industrial salt used is too dirty, the salt bucket should be cleaned once a year. It is better to replace the filter cloth on the salt well during the cleaning process to ensure the smooth process of salt absorption.

Author: Hangzhou Water Shield Technology Co., Ltd.

Website: http://www.zjhzsd.com/

Key words: pharmaceutical pure water equipment, chemical industry water equipment, food water equipment