company news
company news / 公司新聞
Squirrel gas wall-hanging furnace is a leading equipment which integrates water, electricity and gas (fire) and can supply daily hot water and school drinking water equipment for independent heating. It has perfect connection in operation function, reliability and safety. In addition, it has a combination of control equipment and all safety maintenance equipment to ensure users. Easy-to-use comfort and safety reliability. Although the small squirrel wall hanging furnace brings us warm and convenient life, we still need to pay attention to the use of safety and energy saving questions to make our small life more comfortable.
I. Precautions Before Use
1. Recognize the types of gas used: It is necessary to use the gas specified on the nameplate label of rural drinking water heating water heater with squirrel gas. Other gas is prohibited, and the pre-valve pressure of gas can be applied in the range of 1300 Pa-3000 Pa.
2. Check the power connection: use 220V/50Hz AC, use the original three-pin power plug; it is necessary for the power socket connected with the appliances to have a grounding terminal, and the grounding terminal is reliably connected with the public ground line; the switch connected with the appliances should not be set in the room with rain shed or shower equipment; the socket should pass the relevant certification.
3. Check the water pressure of heating system: The pressure of pressure gauge on squirrel wall-hanging stove should be checked frequently. When the pressure of ultra-pure water treatment equipment is too low, the gas heating water heater will shut down. The defective code will appear on the operating board and the indicator light will be on. At this time, water must be replenished to ensure that the pressure of water in the gas heating water heater is between 1bar and 1.5bar. (0.1 MPa - 0.15 MPa)
4. Check the gas intake valve: Please check whether the intake valve connecting the gas heating water heater has been opened.
5. Check the valves in each room: Check whether the heating valves connecting each room are now fully opened.
II. Notices in Application
1. Not for drinking water, squirrel gas wall hanging stove has water for a long time, the water flowing through it can only be used for general water, not for cooking and cooking.
2. It is necessary for qualified professional personnel authorized by squirrels to complete the equipment, gas change and repair services of squirrel wall-mounted stoves.
3. When using squirrel gas wall-mounted stove, attention should be paid to ventilation and ventilation.
4. When there are shortcomings, please turn off the gas and power supply, check with the instructions of the squirrel wall-mounted stove, and clean up the shortcomings before starting from scratch. Assuming that shortcomings recur, please notify the professional repairman of squirrel to repair them at home.
5. The squirrel wall-hanging stove has dual functions of heating and supplying hot water, so it is not suitable to use only one function. For users who only use heating, it is recommended to use single heater or plate replacement to prevent overheating of hot water pipeline due to long-term non-use of hot water.
6. The squirrel wall-mounted stove is used for heating hot water, so it is connected with a heating network and a clean hot water transportation pipeline that matches the function and heat load of the equipment.
7. The safety equipment and automatic dispatching equipment of the squirrel wall-mounted stove shall not be changed privately during the whole operation time of the equipment.
8. Only professionals are allowed to open the shell of the squirrel gas heating water heater. Others are not allowed to open it without authorization, so as to prevent the accident.
9. Do not touch the exterior of the fire-viewing window to prevent scalding.
3. Antifreeze Safety Matters
1. Under special conditions and specific functional conditions (low temperature, high humidity, minimum operation dispatch), the combustion commodity can be condensated. In this case, the "white smoke" can be seen at the end of the flue, which is completely normal and will not affect the environment.
2. The squirrel wall-hanging stove has the function of anti-freezing and anti-jamming maintenance. Under the condition of guaranteeing the water, electricity and gas supply of the gas-fired heating water heater, there is a large temperature difference between the gas-fired heating water heater and the heating system due to the orientation of the house. It is suggested that the gas-fired heating water heater should be equipped with the temperature difference between the gas-fired heating water heater and the indoor heating system. Minimum local, so that the anti-freezing function of gas-fired heating water heater can maintain the whole heating system of gas-fired heating water heater.
3. When gas heating hot water heater is not used for more than half a year, please cut off the gas source and power supply; in the freezing environment, it is necessary to clean the water in the gas heating hot water heater and pipeline, perhaps only empty the daily hot water, and add antifreeze in the heating hot water to prevent freezing.
IV. Energy Conservation and Maintenance
1. Save water:
1. Hot water faucet should not be opened to the maximum at once: when the hot water faucet is turned on until there is hot water flowing out, the wall-hanging stove has a delay process of about 6 seconds. At this time, the pipeline between the wall-hanging stove and the water faucet is cold water, so even if the water faucet is turned on to the maximum during this period, it is cold water. Assuming the maximum, there will be a lot of cold water wasted in vain. Therefore, in the use of hot water, the small water flow should be opened first, and then the size of the water flow should be adjusted according to the need after the wall-mounted furnace is started to delay the incineration. This not only saves a lot of water, but also shortens the heating time of water, especially for large apartments whose bathroom is far from the wall-hanging stove.
2. Store the outflow cold water in containers: If the small water flow does not start, it may be dirty pipes in the wall-hanging stove or hot water induction is somewhat insensitive, or it may be that the faucet in the house is blocked by scale. At this time, we can find professional repairmen to deal with the squirrel wall hanging stove. In theory, when the temperature of hot water exceeds 55 degrees, scaling occurs very simply, so the temperature setting should not be too high, and it is suitable for comparison below 55 degrees.
3. In the process of bathing, try to minimize the number of tap switches: every time the hot water tap is switched on, the wall-mounted stove will be launched once, which will have a delay of about 6 seconds. During this period, a lot of cold water is wasted. Moreover, when the wall-hanging stove burns hot water, it burns in a big fire before reaching the set temperature, which increases the gas consumption and shortens the service life of the wall-hanging stove.
Two, solar terms
1. Close or lower the heater valves in uninhabited rooms: Assuming that the housing area is larger, the rooms are larger, and the personnel are less than normal, the heater valves in rooms with low frequency may be completely closed or adjusted, which is equivalent to reducing the heating area, not only saving energy, but also in positive condition. The temperature rise of space heating which is often used will also be accelerated and the gas consumption will be reduced.
2. It is not advisable to shut down the wall-hanging stove when nobody is at home during the day, and to set the temperature level to the lowest level. Many office workers are accustomed to shut down the wall-hanging stove when nobody is at home, and then place the boiler in a high-grade place for rapid heating after work. This practice is very unscientific. Because of the large temperature difference between room temperature and wall-mounted furnace, wall-mounted furnace needs time to work in a big fire, which not only does not save energy, but also wastes more gas and increases the time of household freezing, and there is a danger that the boiler or heating plate will be damaged by freezing.
3. If you travel for a long time or do not live, you need to drain the water in the boiler and heater. It is recommended that you search for professional repairmen of squirrel wall-mounted furnace to clean the water in the boiler and heater, so that you can not only use gas, but also not worry about the boiler or heater being frozen out.
The squirrel wall-hanging stove reminds users that in the process of wall-hanging stove operation, besides knowing the basic operation principle of equipment, it also needs to check, maintain and maintain the wall-hanging stove frequently to ensure the safety in the process of wall-hanging stove operation. If users have any questions in the process of application, they can call the national common after-sales service hotline of squirrel wall hanging furnace: 400-668-5315. The after-sales service center of squirrel wall hanging furnace will try their best to deal with users' questions, so that users can feel at ease.
Author: Hangzhou Water Shield Technology Co., Ltd.
Website: http://www.zjhzsd.com/
Key words: rural drinking water equipment, school drinking water equipment, ultra-pure water treatment equipment