色窝窝免费播放视频在线,最近的中文字幕视频完整,久久天天躁狠狠躁夜夜婷,天天AV天天爽无码中文

The bathroom is the most contact area with water. When decorating the bathroom, we should consider the need of waterproof and moisture-proof from the laying of wall and floor tiles, the disposal of ceiling, the installation of pipelines, the selection of water treatment equipment and equipment in Hangzhou, and make careful arrangements. Next, let's take a look with Xiaobian.

When laying wall and floor tiles and stone materials, we should make waterproof layer under the surface layer, choose cement slurry to levelize the ground and coat with waterproof paint, and then lay one layer to 12 cement mortar as the bonding layer, lay down floor tiles and other decorative materials, after watering, pat solid with wooden boards, so as to achieve solid certificates and tight joint water treatment equipment manufacturers. Back coating should be done before stone paving to reduce the occurrence of "waterlogging". Waterproof layer around the contact with the wall should be turned up, about 25 to 30 centimeters above the ground, washing table 1.0 to 1.2 meters above the ground, shower room 1.8 meters above the ground. If paint decoration should first brush waterproof putty and choose waterproof paint. The disposal of surface laminar flow water should be slope-to-ground leakage, no flooding, no water accumulation, and no leakage after 24-hour water storage test.

Microporous aluminum clasps are recommended to enhance ventilation and prevent condensation. If gypsum board ceiling is made, water-proof putty should be brushed first and then waterproof paint should be brushed in reverse osmosis pure water equipment; condensate water is easily produced in PVC ceiling, and drips should be cautiously used.

Pipeline installation should avoid altering the original top and bottom open pipes. When decorating, it should be horizontal and vertical, firmly laid, and the gradient meets the requirements. Installation credentials for valves and taps, flexible and convenient to use, open pipe brush anti-rust paint, dark pipe brush anti-corrosion paint. The water supply pipeline is tightly connected with accessories and appliances, and there is no leakage after water passage test. The design of floor drain should still be based on the upper and lower water pipelines, and the surface should be slightly lower than the ground.

The installation position of sanitary appliances is correct, and the upper edge of the appliances should be level. Bathroom appliances should choose products with brand name and good waterproof performance, such as bathroom lamps used in humid environment for a long time, the shell should be made of stainless steel, with good anti-corrosion performance, and with waterproof power switch, cable and plug, not afraid of water shower and splash when power is on or off, and will not cause leakage or damage. It also needs to be equipped with waterproof lampshade, waterproof socket and so on.

In the bathroom should avoid the use of wooden materials, when it is really necessary to use, should choose fireproof panels or make full mixed oil decoration, are waterproof. When making ceiling or other wrapping decoration, the hidden wooden keel should be painted with waterproof paint or preservatives.

It is very important for bathroom to keep good ventilation environment. Selection of better quality ventilation equipment is helpful to the quick volatilization of moisture and steam, and to keep the room fresh and clean. Do a good job of the above several aspects, you will surely feel the feeling of bathing in the state of complete relaxation of harmony and unity between man and nature.

Author: Hangzhou Water Shield Technology Co., Ltd.

Website: http://www.zjhzsd.com/

Key words: water treatment equipment manufacturer, Hangzhou water treatment equipment, reverse osmosis pure water equipment